PRODUCTS

1060 Aluminum

ꁆ ꁇ

HOME ꄲ PRODUCTS ꄲ product details

1060 pure aluminum: industrial pure aluminum has the characteristics of high plasticity, corrosion resistance, good conductivity and thermal conductivity, but low strength, not strengthened by heat treatment, poor machin ability, and can accept contact welding and gas welding.

Make more use of its advantages to manufacture some structural parts with specific performance, such as aluminum foil made gasket and capacitor, electron tube isolation net, wire, cable protective cover, net, wire core and aircraft ventilation system parts and decorative parts.

Chemical Composition and Mechanical Properties

Al	Si	Cu	Mg	Zn	Mn	Ti	V	Fe
99.60	≤0.25	≤0.05	≤0.03	≤0.05	≤0.03	≤0.03	≤0.05	0.00-0.35

Tensile Strength(Mpa)	≥75(110-136)
yield strength(Mpa)	≥25
EL(%)	(3-5)%
Density(g/cm³)	2.68

Characteristics

Has high plasticity, corrosion resistance, conductivity and thermal conductivity, but low strength, can not be strengthened by heat treatment, and poor machin ability;
It can be gas welding, hydrogen atom welding and contact welding, not easy to braze; Easy to bear all kinds of pressure processing and drawing, bending.

Applications

It is widely used in products with low strength requirements. Products are commonly used in signboards, billboards, building exterior decoration, bus body, high-rise buildings and factory wall decoration, kitchen sink, lamp holder, fan blade, electronic parts, chemical instruments, sheet processing parts, deep drawing or spinning concave utensils, welding parts, heat exchanger, clock surface and disk surface, nameplates, Kitchenware, decorations, reflective appliances, etc.

More details for 1000 series aluminum

Difference Production standard

GRADE	CHINA	USA	JAPAN	EN	GERMANY	UK
Pure series (1000 series)	1050A(L3)	1050A/A91050	A1050	EN AW-1050A/Al99.5		1050A(1B)
	1060(L2)	1060/A91060	A1060	EN AW-1060/Al99.6
	1070	1070/A9100	A1070
	1070A	1070A		EN AW-1070A/Al99.7	Al 99.7/3.0275
	1100(L5-1)	1100/A91100	A1100/AlN00	EN AW-1100/Al99.0Cu
	1200(L5)	1200/A91200	A1200	EN AW-1200/Al99.0	Al 99/3.0205	1200A(1C)
	1350	1350/A91350		EN AW-1350/E-Al99.5		1350(IE)
	1370	1370/A91370		EN AW-1370/E-Al99.7
	1A30(L4-1)	1230/A91230	AlN30
	1A50(LB2)	1050/A91050		EN AW-1050A/Al99.5	Al 99.5/3.0255	1B

Chemical compositions and Mechanical properties

GRADE	STATUS	THICKNESS	TS Rm(MPA)	EL(%)
GRADE	STATUS	THICKNESS	TS Rm(MPA)	A50MM(≥)	A100MM(≥)
1035 1050 1060 1070 1100 1145 1200 1235	O	0.004-0.006	45-95	-	-
		0.006-0.009	45-100	-	-
		0.009-0.025	45-105	-	1.5
		0.025-0.04	50-105	-	2
		0.04-0.09	55-105		2
		0.09-0.14	60-115	12	-
		0.14-0.20	60-115	15	-
	H22	0.0045-0.025	-	-	-
		0.025-0.04	90-135	-	2
		0.04-0.09	90-135	-	3
		0.09-0.14	90-135	4	-
		0.14-0.20	90-135	6	-
	H14、H24	0.0045-0.025	-	-	-
		0.025-0.04	110-160	-	2
		0.04-0.09	110-160	-	3
		0.09-0.14	110-160	4	-
		0.14-0.20	110-160	6	-
	H16、H26	0.0045-0.025	-	-	-
		0.025-0.09	125-180	-	1
		0.09-0.20	125-180	2	-
	H18	0.006-0.20	≥140	-	-
	H19	0.006-0.20	≥150	-	-

GRADE		Al	Si	Cu	Mg	Zn	Mn	Ti	V	Cr	Ni	Ti+Zr	Fe+Ni	Fe
Pure series (1000 series)	1050	99.5	≤0.25	≤0.05	≤0.05	≤0.05	≤0.05	≤0.03	≤0.05	-	-	-	-	0.00-0.40
	1060	99.6	≤0.25	≤0.05	≤0.03	≤0.05	≤0.03	≤0.03	≤0.05	-	-	-	-	0.00-0.35
	1070	99.7	-	≤0.04	≤0.03	≤0.04	≤0.03	≤0.03	≤0.05	-	-	-	-	-
	1100	99.0	≤0.45	0.05-0.20	---	≤0.01	≤0.035	---	≤0.05	-	-	-	-	0.00-0.35

Different available processed finish

GRADE	Available produced status	Available produced type	Available produced specifications(mm)	Available produced finish	Applications
1050、1060、1070、1100	F , O , H12 , H14 , H16 H18 ,H19 , H22 , H24 H26 , H28 ,H111 , H112	Aluminium sheet / coil / foil pipe / profile etc	Thickness: aluminum foil: 0.008~ 2.0 aluminum sheet: 0.3 ~ 6.0 aluminum plate: 6.0 ~ 200.0 (≥200) Width: 1000 - 2500 Length: Customized	Mill / No.4(Brushed) / HL(Hairline) Mirror / Colored / Checkered Etching / Perforated etc	Regular industrial (Cables, wires, capacitor shells, kitchenware, decorative items, and chemical equipment)